Generic filters
Exact matches only

Xlerate™

Ultra-Concentrated High Productivity Stripper

  • Aggressive dual-solvent formulation easily strips all seals and finishes on the first pass.
  • Ultra-concentrated 1:19 to 1:30 dilution provides the utmost in economy and convenience and greatly reduces inventory.
  • Powerful enough to remove multiple layers of highly burnished finishes.

Product Code: 2917FX

Sizes Available

Product Videos

Ultra-Concentrated High Productivity Stripper

Aggressive dual-solvent formulation easily strips all seals and finishes on the first pass.


2917FX


Ultra-Concentrated High Productivity Stripper

Aggressive dual-solvent formulation easily strips all seals and finishes on the first pass.


2917FX


Additional Features

  • Low odor formulation affords user comfort and eliminates complaints.
  • Effective in cold to warm water.
  • Slow evaporation rate for longer dwell time and reduced re-mopping.

Properties

  • Type – High Active Stripper
  • Form – Clear Liquid
  • Odor – Slight Solvent
  • Color – Aqua
  • Weight per Gallon – 8.47 Lbs.
  • pH – 10.5-11.5
  • pH 1% – 10.5
  • Storage Stability – Min. 1 Year
  • Freeze/Thaw – Passes 3 Cycles
  • Foam Height – Moderate
  • Actives – >80%
  • Phosphate (%P) – None

* Properties are typical and subject to usual manufacturing tolerances.

Directions

READ BEFORE USING:

  1. This is a highly aggressive formula. Read precautions below.
  2. Dilute before using. Do not use on painted surfaces or wooden floors. Use cautiously for stripping linoleum, rubber or asphalt tile as stripper may cause bleaching, softening or bleeding.
  3. Wipe up any spills or splashing from baseboards or painted surfaces immediately.

NOTE: For stripping and maintaining asbestos containing tile, follow OSHA guidelines or EPA guidelines.

DIRECTIONS:

  1. To remove heavy build-up, dilute with cold water as follows:
    1:19 to 1:30 part Xlerate to water.
  2. Apply liberally to floor. Be sure to leave surface VERY wet!
  3. Allow to remain on floor 8 to 10 minutes. Agitate with a mop or brush. Use scraper or doodlebugs to remove heavy finish build-up in corners and edges.
  4. Strip mechanically with swing machine or a propane stripper using appropriate pads.
  5. Pick up solution using a wet vac or auto-scrubber. If any finish remains (around baseboards), reapply stripping solution and agitate as necessary.
  6. Rinse floor thoroughly with Neutral Cleaner Plus(2746FC) or Blue Concentrate(2085FC) for best results. Allow floor to dry.
  7. Apply finish or seal.

See label directions and SDS for complete usage and safety instructions.

Packaging

Product Code Sizes UPC Code Pack Size (inches) Cube (ft) Pack Wt. (lbs) Full Pallet
2917FX-GR4 4 x One
Gallon
783366291748 13 x 13.5 x 12.5 1.27 36.58 36
2917FX-Q6 6 x One
Quart
783366291717 10.5 x 7 x 11 0.47 13.985 88

 

  • Product Code: 2917FX-GR4
  • Sizes: 4 x One Gallon
  • UPC Code: 783366291748
  • Pack Size (inches): 13 x 13.5 x 12.5
  • Cube (ft): 1.27
  • Pack Wt. (lbs): 36.58
  • Full Pallet: 36
  • Product Code: 2917FX-Q6
  • Sizes: 6 x One Quart
  • UPC Code: 783366291717
  • Pack Size (inches): 10.5 x 7 x 11
  • Cube (ft): 0.47
  • Pack Wt. (lbs): 13.985
  • Full Pallet: 88